金属表面热处理含油废水处理工艺的设计

2008年3月 来源: 中国水处理设备网

【英文篇名】 Treatment of Oily Wastewater from Metal Surface Heating Treatment
【作者中文名】 王刚; 吴卫红;
【作者英文名】 WANG Gang; WU Wei-hong(School of Mechanical Engineering; Hangzhou Dianzi University; Hangzhou Zhejiang 310018; china);
【作者单位】 杭州电子科技大学机械工程学院; 杭州电子科技大学机械工程学院 浙江杭州; 浙江杭州;
【文献出处】 杭州电子科技大学学报, Journal of Hangzhou Dianzi University, 编辑部邮箱 2007年 04期 
期刊荣誉:ASPT来源刊  CJFD收录刊
【关键词】 含油废水; 电镀漂洗废水; 混凝剂; 絮凝沉淀;
【英文关键词】 oily wastewater; electroplating potch wastewater; flocculation precipitation; Coagulant;
【摘要】 随着工业的发展,工业用油的使用量越来越大,但由于各种技术限制和落后的管理等原因,大量油品进入水体,形成污染。选用一种既经济又简便的水处理技术越来越受到人们的关注。该文主要对金属表面热处理产生的含油废水进行研究,最终设计该废水处理方案。该工艺具有简单易行、投药量少和经济效益良好等优点。而且该工艺通过以废治废,大大降低了运行成本,且处理效果很好。
【英文摘要】 Along with the industry development,large oil entered into the water body as a result of technical limit and backward management.More and more attention was paid to economical and simple water treatment technology.The objective of this paper was to determine the best effect of flocculent precipitate by laboratory research of oil waste water obtained from the metal surface heat processing,and design waste water treatment process according to the test result.This progress has some advantages,including commonp...
【DOI】 CNKI:SUN:HXDY.0.2007-04-020

  【关闭
水处理设备综合服务门户
编辑信箱:wateruu@126.com 业务合作:王先生 13787106234 0731-2476887 广告合作:喻先生 027-87184460 13607192028 客户服务:客服一 客服二 MSN:xywang_net@hotmail.com
本站介绍 | 联系我们 | 版权声明 | 帮助信息 | 会员及广告服务 | 相关法律 | 网站地图
中国水处理设备网(www.wateruu.com)版权所有  ©2007-2008 湘ICP备06007577号